AsReader ASR-020D Скачать руководство пользователя страница 69

Страница: 69 / 162

C-20

Coupon Report

Traditional coupon symbols (old coupon symbols) are composed of two bar codes: UPC/EAN

and Code128. A new coupon symbol is composed of a single Databar Expanded bar code. The

new coupon format offers more options for purchase values (up to $999.99) and supports

complex discount offers such as a second purchase requirement.

An interim coupon symbol also exists that contains both types of bar codes: UPC/EAN and

Databar Expanded. This format accommodates both retailers that do not recognize or use

the additional information included in the new coupon symbol, as well as those who can

process new coupon symbols.

NOTE

The behavior described above applies when

UCC Coupon Extended Code

is enabled.

If disabled (default) then new coupons (GS1 Databar Expanded starting with 8110 )

decodes as a normal GS1 Expanded (RSS) bar code.

Scan a bar code below to select one of the following options for decoding coupon symbols:

•

Old Coupon Symbols - Scanning an old coupon symbol reports both UPC and Code 128,

scanning an interim coupon symbol reports UPC, and scanning a new coupon symbol

reports nothing (no decode).

•

New Coupon Symbols - Scanning an old coupon symbol reports either UPC or Code 128,

and scanning an interim coupon symbol or a new coupon symbol reports Databar

Expanded.

•

Both Coupon Formats - Scanning an old coupon symbol reports both UPC and Code

128, and scanning an interim coupon symbol or a new coupon symbol reports Databar

Expanded.

Содержание ASR-020D



































































































































































Результаты поиска

Содержание ASR-020D

Отзывы:

AsReader ASR-020D, Руководство по параметрам, Страница: 69 / 162

Результаты поиска

Содержание ASR-020D

Отзывы: