AsReader ASR-020D Скачать руководство пользователя страница 13

Страница: 13 / 162

B-3

Lock/Unlock Parameter Scanning

This feature locks parameter settings with a 4-digit code to prevent the user from changing

parameter values by scanning parameter bar codes. This provides an added level of security

not offered via Disable Parameter Scanning.

After locking parameter settings, the only parameter bar code that is accepted is Unlock

with the correct code.

NOTE

Parameter Scanning

must be enabled in order to scan the Lock parameter bar code. Once

parameter scanning is locked, scanning the Enable or Disable Parameter Scanning bar code results in

a parameter error beep.

To lock parameter scanning:

Scan the Lock bar code.

Scan four bar codes from

Appendix Numeric Bar Codes

that represent the desired code.

Enter leading zeros for numbers below 1000, e.g., to program a code of 29, enter 0, 0, 2,

9. A "lock" beep sounds (two long high beeps) in addition to the parameter entry beep.

To unlock parameter scanning:

Scan the Unlock bar code.

Scan four bar codes from

Appendix Numeric Bar Codes

that represent the correct code.

An "unlock" beep sounds (two long low beeps) in addition to the parameter entry beep.

Entering an incorrect code results in a parameter error beep.

Содержание ASR-020D



































































































































































Результаты поиска

Содержание ASR-020D

Отзывы:

AsReader ASR-020D, Руководство по параметрам, Страница: 13 / 162

Результаты поиска

Содержание ASR-020D

Отзывы: