Aspen Avionics Evolution 1000 Pro/VFR PFD, Руководство пилота, Страница: 54 / 66

CHAPTER 4
ASPEN ADS
-B IN
ADS-B Pilot’s Guide
Page 4-28
091-00057-001 REV A
4.5.6 TFR
Display TFR Information
1. With the TFR weather product screen displayed, press the lower Left Button
labeled INFO. The Left Knob label changes to TFR and both the Left Knob
and Left Button label turn magenta. (
Figure 4-41
)
2. Rotate the Left Knob to select the desired TFR. A white border will surround
the red TFR border. (
Figure 4-42
)
3. Press the Left Knob to display the selected TFR information. (
Figure 4-43
)
4. Repeat steps 2 and 3 as desired.
5. Press the lower Left Button, to exit selection mode. The Left Knob and Left
Button label turn cyan.
TFR Age Annunciations
When TFR is displayed one of the data age annunciations in Table 4-8 shall be
displayed with the correct age value.
4.5.7 Winds/Temps Aloft
Winds are displayed using the selected altitude filter. The pilot adjusts the altitude
filter value by pressing either the FL+ or the FL- Hot Key. The default Winds Aloft
altitude filter is 6000ft (FL060) if not previously set. Once the altitude filter has been
changed, the selected setting becomes the default setting. The Winds Aloft filter level
is displayed in the lower right corner of the display.
The Winds Aloft altitude filter increments in are 3000, 6000, 9000, 12000, 180000,
24000, 30000, and 39000 (e.g. FL240). When the FL+ Hot Key is pressed, the altitude
filter advances to the next filter increment. When the FL- Hot Key is pressed, the
altitude filter decreases to the next filter increment.
( Figure 4-44).
Figure 4-44
Winds Aloft Screen
Figure 4-41
TFR Selected
Figure 4-42
Selecting another TFR
Figure 4-43
Selected TFR Information Pop up