Aspen Avionics Evolution 1000 Pro/VFR PFD, Руководство пилота

Страница: 34 / 66

CHAPTER 4
ASPEN ADS
-B IN
ADS-B Pilot’s Guide
Page 4-8
091-00057-001 REV A
4.1.7 Traffic Altitude Filter
There are five Altitude Filters available per Table 4-1. The pilot selects the altitude filter
level by continuously pressing the TRFC Hot Key.
Hot Key Label Altitude Filter Level Traffic Display Volume
TFC Off None
TFCN Normal ±2,700 ft
TFCU Unrestricted ±9,900 ft
TFCA Above +9,900 ft to -2,700 ft
TFCB Below +2,700 ft to -9,000 ft
Table 4-1
Traffic Filter Parameters
NOTE
Traffic that is within 100 feet of the ownship shown an
altitude value of 00, above or below the traffic symbol
as appropriate.
NOTE
When the traffic is flying level, no arrow is shown.
When the traffic is not reporting an altitude, neither
the arrow nor the altitude indication is shown.
NOTE
Depending on the position of the Traffic Advisory at
the edge of the screen, the traffic symbol data block
may or may not display.
WARNING
Do not rely on the PFD or MFD as the sole source of data for collision avoidance. It is
the pilot’s responsibility to visually acquire other aircraft for safe flight. Maneuver your
aircraft based only on ATC guidance or positive acquisition of conflicting traffic. Traffic
information is:
• Provided as a proximity warning only
• Intended to assist the pilot in the visual acquisition of other aircraft
• Not intended to provide recommended avoidance maneuvers
• Not provided for aircraft that are not transponder equipped, experiencing a
transponder failure, or out of radar coverage
.
NOTE
Only traffic overlay supports the “Off” altitude filter level