Aspen Avionics Evolution 1000 Pro/VFR PFD, Руководство пилота, Страница: 24 / 66

CHAPTER 3
ASPEN ADS
-B OUT
ADS-B Pilot’s Guide
Page 3-4
091-00057-001 REV A ADS-B Pilot’s Guide
Page 3-5
091-00057-001 REV A
3.2.2 PFD is the controller – Changing the UAT Code
(Figure 3-2)
To change the UAT Code.
1. Press the MENU button
2. Press the Hot key adjacent to the “UAT CODE” label
(The UAT code menu label turns magenta an the EDIT VALUE label and PUSH TO
ADVANCE label are displayed above the right know indicating that the code is editable)
3. Press the right knob to select the digit to be edited. The fourth knob press will
advance to the first digit.
4. Rotate the right know clockwise to increase or counter-clockwise to decrease
the value of the selected digit
5. Press the Hot Key adjacent to the UAT CODE menu label or the MENU button to
activate the new code
Figure 3-2
Menu - UAT Code Change
NOTE
It is good practice to change the squawk on the
transponder at the same time because the transponder
could be interrogated at any moment. Control
would then be immediately transferred back to the
transponder and the old squawk would be transmitted.
Changing the squawk on the PFD does not change
the squawk on the transponder. This must be done
manually.