ASP LaserTraq, Руководство пользователя

Страница: 9 / 28

LaserTraq 7
Barcode Label Hints
•
You should try to avoid using poor quality labels or inappropriate
types of barcodes. If in doubt, discuss this with your Dealer.
•
Guard against barcode damage such as:
♦
Liquid spills on the barcode symbol (coffee, etc).
♦
Ink smearing or erased bars which may result from excessive
pressure on the barcode surface.
♦
Scratches through the barcode symbol.
♦
Writing across the barcode symbol.
•
The use of a protective covering, such as “invisible” sticky tape or
clear Contact, will prolong the useful life of a barcode label.
The LaserTraq has been designed to provide a high read rate when a
good symbol is scanned. Scanning difficulty is usually caused by either a
damaged barcode symbol or improper operation of the system by the
operator.
Care of your LaserTraq
Although the LaserTraq is ruggedly built, damage is possible through
misuse. These few simple common sense rules will cover help you to
avoid problems:
•
Don’t connect or disconnect any of the plugs when the power is on.
•
Don’t drop the LaserTraq. Although the LaserTraq has been tested to
survive an average accidental drop, it is most unwise to let this
happen since damage to the case, display or memory could result.
•
Do use the wrist strap and Leather Case to help prevent problems.
•
Don’t leave the unit in a “hostile” environment where it could be
exposed to direct sunlight, dust or dirt, moisture, or extremes of
temperature.
•
Don’t press the keys with sharp objects - you may damage or
perforate the keys
•
Don’t place items on top of the LaserTraq unit.
•
Don’t lay the LaserTraq face down as accidental operation may
result.
•
Clean the LaserTraq only with a soft dry cloth, no water.