ASP LaserTraq, Руководство пользователя

Страница: 21 / 28

LaserTraq 19
Once you’ve corrected the date and/or time, press the YES key to store
the new date and time and return to the Setup Menu. To discard any
changes you’ve made, and return to the Setup Menu without altering the
date and time, press the
NO key.
Note that the on-screen display of the time and date does not change
while you’re in this function.
Password
Using this function, you can set a password to restrict access to the Setup
Menu.
To enter a new password, use the numeric keys or use the SHIFT and/or
CAP keys to enter alphanumeric characters, then press E1 (enter) to store
the new password. The display will then show a “Success!” message,
and then await a keypress before returning to the Setup Menu. The
password can be up to eight characters long.
Decode
This function allows you to select the barcode symbologies that can be
read by the LaserTraq. An asterisk on the left of a symbology shows that
the symbology is enabled.
D e c o d e
* 1 C O D E _ 3 9
* 2 C O D E _ C D B
* 3 C O D E _ E A N
* 4 C O D E _ U P C
* 5 C O D E _ 1 2 8
* 6 I T F 2 O F 5
Use the
Õ
and
Ö
arrow keys to move the highlighted cursor between
symbologies, then use the E1 (enter) or SP (space) keys to toggle the
symbology under the cursor on or off. Press the MENU key to return to
the Main Menu.
Note that the display is actually only four lines long – it will scroll to
display the other symbologies when the highlighted bar gets to the top or
bottom of the screen.