VDSL CPE CONVERTER USER’S MANUAL
VER. A.5
8
1.
The RJ-11 port support 10 Mbps connections. When inserting a
RJ-11 plug, be sure the tab on the plug clicks into position to ensure
that it is properly seated.
2. Do not plug a RJ-11 phone jack connector into the Ethernet port
(RJ-45 port). This may damage the converter Instead; use only
twisted-pair cables with RJ-45 connectors that conform to FCC
standard.
Notes:
1. Be sure each twisted-pair cable (RJ-45) does not exceeds 100
meters (333 feet).
2. RJ-11 port use 24 ~ 26 gauge phone wiring, we do not
recommend 28 gauge or above.
3. We advise using Category 3,4,5 cable for Cable
Modem or Router connections to avoid any confusion or
inconvenience in the future when you upgrade attached
to high band width devices.
