VDSL CPE CONVERTER USER’S MANUAL
VER. A.5
18
to the wrong mode) whenever the attached device is reset or
experiences a power fluctuation. The best way to resolve this problem
is to upgrade these devices to a version that support Ethernet and
VDSL.
Physical Configuration
If problems occur after altering the network configuration, restore the
original connections, and try to track the problem down by
implementing the new changes, one step at a time. Ensure that cable
distances and other physical aspects of the installation do not exceed
recommendations
System Integrity
As a last resort verify the switch integrity with a power-on reset. Turn
the power to the switch off and then on several times. If the problem
still persists and you have completed all the preceding diagnoses, then
contact your dealer
