Page 27
b.
RTSP Mode
The NVR only supports IP address
indication, live video, and video recording
under RTSP Mode. Other functions like
motion detection are not supported.
Key-in the
IP Address
,
RTSP
Port
,
User
Name
, and
Password
of the device you are
connecting to the NVR. (You can find the
information from the IP Camera web control page.)
To link to the IP camera, check the RTSP Path settings of your IP camera, and key-in
the corresponding values of two streams in “RTSP Path 1” and “RTSP Path 2”.
Note:
Make sure the sub-stream resolution of camera is VGA (640x480), otherwise
you will receive a warning message.
c.
ROI Mode
This function allows users to set up a
channel as an attached channel which
based on a normal/RTSP channel that has
been set up, and can display the same live
view as the normal/RTSP channel. It is
not physically linked to a camera, so it
does not actually increase the bandwidth
loading. Therefore, users cannot setup motion detection or image adjustment on the
attached channel.
Enable:
Choose “
ROI
”.
Attached Channel:
Assign a normal/ RTSP IP camera channel.
Ratio:
Adjust the zoom ratio from the drop down menu or click & drag on the red
frame to your desired area on the live view.
II.
Edit
Click
to open Edit window and adjust settings of the camera.
Click on
Save
button as the final step to confirm the change.
