Page 20
Right-click the mouse to highlight the camera icon, a small window will pop up,
choose Enter to Delete to remove the camera from E-map.
c.
Event Settings
Camera Event Settings
Click on the arrow on top-right corner of the window for scrolling left & right to
select the channel which you would like to apply the settings to. Tick any checkbox
to assign the
Event
type, and tick the other checkboxes of
Event Action
so once an
event occurs, the NVR will carry out the action you have assigned for this channel.
Click
Copy
to choose other channels which you may apply the same settings to.
System Event Settings
Set up the type of
Event Action
which you would like to proceed when any of the
Event
selections is triggered after its checkbox is ticked.
