Page 10
Tick the Enable DHCP Server
function checkbox. Once the function is activated, the NVR
can act as DHCP server which will assign or distribute one of the IP addresses according
to the setup IP address range (start and end IP Address.) to the connected IP CAM
(setup DHCP function).
Insert both the start IP and End IP Address of DHCP server in the DHCP IP address
Range. Set the Lease Time
of DHCP server.
Apple
Tick Enable Bonjour
to allow Apple systems to connect to this NVR. Key-in the name of
the NVR in Bonjour column.
The web browser
Safari
also has a Bonjour function. Tick
Include Bonjour
in the
bookmark setting for the NVR to appear under the bonjour category. Click the icon to
connect to the NVR.
The Bonjour function on Safari browser doesn't support HTTPS protocol. If on the NVR
you select
https
, the NVR will appear on Safari's bookmarks but it cannot be accessed.
Take as a reference the following image:
UpnP
This IP camera supports UPnP, if this service is enabled on your computer, the NVR will
automatically be detected and a new icon will be added to
My Network Places
.
UPnP Port Forwarding
