36
7. Factory Default
To recover the default password and other settings, please follow the steps:
1. Power off the camera.
2. Use a needle about 5cm long insert into the "Factory Default Hole" and push the
button in the hole, keeping push it and don't release.
3. Power on the camera. Don’t release the button during the system booting.
4. It will take around 30 seconds to boot the camera.
5. Release the button when camera finishes proceed.
6. Re-login the camera using the default username (admin) and password (admin).
7. The IP address is probably restored to the default, in this case, use IP Search to
search the camera. The default IP address is 192.168.1.200
Factory Default Hole
