30
[Area Setting:] line. Use mouse to drag the area on the video.
Adjust the Sensitivity:
To adjust the sensitivity of detection, select the level from the
pull-down list.
Activate Motion Detection:
To activate the motion detection, enable the “Detect
Area” check box, and then select the actions when the motion is triggered.
Subject:
The subject of the E-mail.
Interval:
The interval time between multiple detections. For example, if the time set to
10 seconds, when the motion detection is triggered at time 10H:05M:10S, the next
detection will be accepted after 10H:05M:20S. The detections between 10H:05M:10S
to 10H:05M:19S will not be accepted.
Record File
There are 3 methods to record the event video and send out via E-mail, FTP:
AVI File:
The event video will be recorded as still image with AVI format. The
beginning and ending time of the file is depending on the Record Time Setting.
JPEG Files:
This option is available when set Video Format as “JPEG” in Video
Setting. When event is triggered, the camera will take a series of snapshot with JPG
format. The beginning and ending time of the snapshot is depending on the Record
Time Setting.
JPEG File:
This option is available when set Video Format as “JPEG” in Video Setting.
When event is triggered, the camera will take a snapshot with JPG format. The
interval time of the snapshots is depending on the Interval Setting.
Record Time Setting
Configure the record time for the event recording file. For example, if set “Pre Alarm”
as 3 seconds and set “Post Alarm” as 5 seconds, when motion detection is triggered
at time 10H:05M:10S, the video will be recorded from 10H:05M:07S to 10H:05M:14S.
After set up, click [Apply] to save the settings.