background image

47

309420

Technical Data

Maximum fluid working pressure – sprayer

2800 psi (19 MPa, 193 bar)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum fluid working pressure – Combo Gun, extension, roller*

3600 psi (25 MPa, 248 bar)

. . . . . . . . . . . . . . . . . . . 

Sprayer inlet size

3/4 in. internal thread (standard garden hose)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sprayer outlet size 

1/4 npsm external thread

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

 Combo Gun fluid inlet size

1/4 npsm (swivel)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

 Combo Gun fluid outlet size

7/8–14 unf

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Electric motor

3/8 hp 7.0 Amp open frame universal

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sprayer weight only

13 lb (6 kg)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
     Length

14.9 in (37.8 cm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

     Width

15.0 in (38.1 cm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

     Height

15.6 in (39.6 cm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Wetted parts sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

stainless steel, brass, ultra–high molecular weight polyethylene (UHMWPE), leather 

carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer

Inlet Screen on Suction Tube

35 mesh (450 microns)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum material temperature

120

_

F (50

_

C)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Electrical power requirement

120V AC, 60 Hz, 1 phase, 15A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

The best operating pressure is the lowest pressure that provides an even paint supply to the roller and  typically does

not exceed 300 psi (2.1 MPa, 21 bar).

Содержание Zip-Spray-n-Roll 233792

















































Отзывы: