ASM 249616, Операция

Страница: 5 / 16

Installation
311206A 5
Installation
Grounding and Electric
Requirements
The sprayer must be grounded. Grounding reduces the
risk of static by providing an escape wire for the electri-
cal current due to static build up.
Ground sprayer with grounding clamp.
Spray gun: ground through connection to a properly
grounded fluid hose and pump.
Fluid supply container: follow local code.
Solvent pails used when flushing: follow local code.
Use only conductive metal pails, placed on a grounded
surface such as concrete. Do not place the pail on a
nonconductive surface, such as paper or cardboard,
which interrupts grounding continuity.
Grounding the metal pail: connect a ground wire to the
pail by clamping one end to pail and other end to ground
such as a water pipe.
Maintaining grounding continuity when flushing or
relieving pressure:
hold metal part of the spray gun
firmly to the side of a grounded metal pail, then trigger
the gun.
TIA
WARNING
HOT SURFACE HAZARD!
Engine and drive housing may be very hot during
operation and could burn skin if touched.
WLD