ASM 249616, Операция, Страница: 12 / 16

Cleanup
12 311206A
Cleanup
1. Relieve Pressure
2. Turn prime valve down.
3. Remove hose, guard, SwitchTip, and filter (see gun
manual 309971 for more information).
4. Unscrew bowl, remove filter. Assemble without filter.
5. Clean all parts in flushing fluid. Use a soft-bristle
brush to remove dried-on material.
6. Remove siphon tube set from paint and place in
flushing fluid. Use water for water base paint and
mineral spirits for oil base paint.
7. Turn engine ON and start engine. Set pump switch
ON.
8. Turn prime valve horizontal.
9. Hold gun against paint pail. Take trigger safety OFF .
Trigger gun until flushing fluid appears. Turn pres-
sure control up until motor begins to drive pump.
TIA
WLD
TIA
)/86+
WLE
3$,17
)/86+
WLD
2))
21
TIA
WLD