ASL INTERCOM RPA01, Руководство по эксплуатации продукта

Страница: 13 / 20

RPA01 - Product Manual
U-0618-0086.doc – Issue: 04 complete, approved
Page 13 of 20
3.3 Replacing the Battery
The built-in LiPo (Lithium Polymer) battery has a lifespan of more than 1000 recharging cycles under
normal conditions. This translates to approximately 3 years of battery life for normal use.
Once the battery ceases to hold enough charge for a full day use it should be replaced.
1. REMOVE SCREWS USING
2 MM ALLEN KEY OR
DRIVER.
2. REMOVE THE BATTERY
COVER.
1. RELEASE THE CLIP AT
THE BOTTOM OF THE
RPA01 CASE.
2. REMOVE THE BATTERY.
1. FIT THE NEW BATTERY IN
PLACE SO THAT THE BATTERY
CONTACTS MEET THE
TRANSMITTER CONTACTS.
2. RE-FIT THE BATTERY COVER.
1 2 3
FULLY CHARGE THE NEW
BATTERY BEFORE USE.
IT TAKES ABOUT 2 HOURS.
PLEASE REFER TO SECTION
"3.1 Charging the Battery".
4
BATTERY
1. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
2. REPLACE ONLY WITH THE SAME (VARTA EASYPACK 550) OR EQUIVALENT TYPE.
2. DISPOSE OF BATTERY CAREFULLY TO AVOID ENVIRONMENTAL DAMAGE.
3. DO NOT DISPOSE OF BATTERY IN A FIRE.
! !