ASL INTERCOM RPA01, Руководство по эксплуатации продукта

Страница: 7 / 20

RPA01 - Product Manual
U-0618-0086.doc – Issue: 04 complete, approved
Page 7 of 20
1 Microphone
Front facing microphone gives low susceptibility to acoustic feedback.
2 LCD Display
The LCD display shows the currently selected channel number, and the battery level.
Three battery levels are shown via 3 icons:
FULL
CHARGE
LOW
CHARGE
FLAT BATTERY
NO ICON
BATTERY:
MEDIUM
CHARGE
The RPA01 transmitter is powered by a rechargeable battery. A new battery must be charged
for at least 2 hours before being used for the first time. It reaches its optimum capacity after
a few cycles of use.
A fully charged battery should last up to 7 hours of continuous talk time, which translates to
several days of normal operational use. However it is recommended that the RPA01
transmitter is returned to its charging bay on a daily basis to completely eliminate the risk of
the batteries running flat when the unit is in service.
The battery must be charged in-situ using the RCS01 Charging Station, which can be ordered
separately. Please, refer to the RCS01 Charging Station Product Manual for further details
[Table 1, page 18].
3 & 4 Channel Up & Down Button
Pressing either channel button momentarily powers the unit up, and holds power on for a few
seconds; the unit then shows the currently selected channel number on the LCD display.
Subsequent presses of the Channel Up and Down buttons then increment or decrement the
channel. Note that the microphone does not broadcast during this time, to allow the user to view
and change channel without making an announcement. Once the channel has been selected
pressing PTT will enable transmission on the selected channel.
5 Label
An adhesive label for use with water-resistant ink is supplied. Customised label to order.
6 PTT Button
Push To Talk button activates the transmission when pressed.
7 LED
When the RPA01 transmitter is in use:
OFF Transmission is disabled.
ON
Blue
PTT button is pressed and the Radio Microphone is transmitting.
FLASHING
Blue
Battery needs to be recharged.
When the RPA01 transmitter is placed in the Charging Station:
ON
Amber
Battery is charging.
ON
Green
Battery is charged.