ASL INTERCOM RPA01, Руководство по эксплуатации продукта

Страница: 14 / 20

RPA01 - Product Manual
U-0618-0086.doc – Issue: 04 complete, approved
Page 14 of 20
3.4 Replacing a Broken Belt Clip Plate
Use this procedure to replace a broken belt clip plate with a new one.
1. REMOVE SCREWS USING
2 MM ALLEN KEY OR
DRIVER.
2. REMOVE THE BATTERY
COVER.
LIFT THE PLATE TO REMOVE.
1. TIGHTLY FIT THE NEW PLATE BY
PUSHING IT INTO PLACE.
2. RE-FIT THE BATTERY COVER.
1 2 3
LATERAL FIXINGS
TOP FIXINGS
3.5 Fitting a Belt Clip Plate
Use this procedure to replace a rear plate without belt clip plate with a belt clip plate.
1. REMOVE SCREWS USING
2 MM ALLEN KEY OR
DRIVER.
2. REMOVE THE BATTERY
COVER.
LIFT THE PLATE TO REMOVE. 1. TIGHTLY FIT THE NEW PLATE BY
PUSHING IT INTO PLACE.
2. RE-FIT THE BATTERY COVER.
1 2 3
LATERAL FIXINGS
TOP FIXINGS