If YES is pressed, the parameters are reset to
Factory Default
and this screen is shown. The
system will tell you when all of the settings have
been changed to Factory Settings.
The OK button will return the user to the Main
Programming screen.
ALL SETTINGS RESET
This screen is shown in response to
pressing the MORE button on the
PROGRAM SETTINGS screen.
The version of the ASL 110 FUSION and
the ASL 165 Programmer and Display is
also shown.
MORE SETTINGS
The Pad’s illuminate in Orange when the Pad is set to
Proportional and Green when set to Digital (not
shown). When activated a Green light next to the
Mode or User Port will indicate the switch is working
properly. This tests the Mode and User Port for activation.
DIAGNOSTIC
Diagnostic:
This screen shows the pad’s, switch port, and user
port activations. The “0” next to the Pad indicate the percentage
of Drive Demand.
MAIN PROGRAMMING
-
MORE SETTINGS
FUSION 165 DISPL AY, PROGRAMMER AND AT TENDANT CONTROL
When the Attendant Control is pressed, the following screen will be displayed.
Left:
Attendant and Head Array are active.
Center:
Attendant is active, Head Array is inactive.
Right:
FUSION is powered off. Attendant is active and Head Array is off.
UNDERSTANDING THE ATTENDANT CONTROL
When the Proportional Slide is OFF the Attendant Control will work in a Digital Mode. Pushing the screen in the
desired direction will move the chair in that direction to the speed that the Digital Minimum Speed is set.
When the Proportional Control is
activated you can place your finger
on the middle of the screen.
Moving your finger to the very
edge of the outer circle will move
the chair faster. Moving your
finger around the circle, moves
the chair in the corresponding
direction.
When the FUSION Head Array image is
on the screen, the Attendant function
works as an assist. Meaning, it works in
conjunction with the FUSION if a person
using the FUSION needs a little help
while they are driving. You can help them
‘Course Correct’ while they are moving.
If you want to stop the chair from moving, tap
the picture of the FUSION on the screen and
the FUSION will stop movement of the chair.
When the picture of the FUSION has a circle with
a line through it, the Attendant Control will still
function, but the FUSION will not. This way the
Attendant can manually control driving.
When the display is in Atendant Mode and
the FUSION icon has the power indicator
on/off displayed, the power to the FUSION
is OFF, but the power to the attendant is
still active.
Sc
re
en
A
Screen
C
Screen
B
When the user taps the Attendant Control icon, the
programmer will display the Attendant Control screen.
To orient the Attendant Control -
Forward
will always be in the UP position when the
cable is coming out of the top of the 165 Programmer.
When the display is showing the full
screen attendant option, the Attendant
Control is active.
TOP OF
PROGRAMMER
ATTENDANT CONTROL
ACTIVE
This screen is shown in response to pressing the
RESET SETTINGS button on the MORE settings
screen.
The Reset Screen will take the FUSION back to
the Factory Settings. You will be prompted to be
double sure that you want to do this.
If NO is pressed, settings will not be changed, and
no action is performed.
RESET SETTINGS
FUSION 165 DISPL AY, PROGRAMMER AND AT TENDANT CONTROL
A
B
C
