SETTINGS
MAIN PROGRAMMING
-
SETTINGS
USER SETTINGS
Timeout:
The length of time that the User Switch has to be held to move to the next
setting. The adjustment range is in seconds:
1 sec, 1.5, 2, 2.5, 3, 4, 5, and OFF.
R-Net Enable:
Changes the User Screen to R-Net features for easier access.
Mode (Reverse):
The Slide switch will change how the mode switch responds to
activation. The choices are Mode and Reverse.
The Settings Screen will allow the
Auditory beeps to be turned on and off.
Power Up Idle:
When this setting is on it will allow the FUSION to stay off when
the chair is turned on. An activation of the User Switch will turn the system on
when a patient is ready to move.
The Veer Adjust will help a chair drive in a straight line by
adjusting the signal from the FUSION Input to the Controller.
The range is from
-20 to +20.
Each chair will have a
slightly different setting. The Factory Setting is set at
-2
.
VEER ADJUSTMENT
This will allow the FUSION Features in R-Net
that a person is Not Using to be turned Off.
If someone is not using Bluetooth through
the FUSION, or does not need access to the
R-Net User Menu, you can slide them to
Off and they will not appear on the main
screen.
FEATURE SETTINGS IN R-NET
ATTENDANT SETTING
The Attendant Settings screen is displayed
when the “ATTENDANT SETTING” button is
pressed from the Pad Performance screen.
When the Proportional line is green the
Attendant Control will work proportionally.
When it is not green, it works as a Digital
Control.
FUSION 165 DISPL AY, PROGRAMMER AND AT TENDANT CONTROL
The Pad Performance screen is displayed
when the “PERFORMANCE” button is
pressed from the Pad Settings screen.
PAD PERFORMANCE
FUSION 165 DISPL AY, PROGRAMMER AND AT TENDANT CONTROL
SETTINGS
This screen is shown when the USER
SETTINGS button is pressed from the
Main Programming screen.
This screen is shown when the USER
SETTINGS button is pressed from the
Main Programming screen.
MAIN PROGRAMMING
-
SETTINGS CONTINUED
FEATURE SETTINGS
This will allow the FUSION
Features that a person is
Not Using to be turned OFF.
If someone is not using Bluetooth
through the FUSION, or is not
changing Profiles, you can slide
them to OFF and they will not
appear on the Main Menu.
