Service and Warranty
Name and Address of Authorised Distributor:
This product carries a full warranty. For full details of warranty
and service agreements, please contact the Authorised
Distributor who supplied the product to you.
Exclusions
The warranty does NOT cover:
1.
Customer misuse, including incorrect installation.
2.
Damage other than manufacturing defects.
3.
Transit / Courier damage.
4.
Incorrect voltage or power supply used.
5.
Incorrect input signal.
6.
Abnormal environmental operating conditions.
7.
Damage incurred by accident, fire, lightning or other
hazard.
8.
Modification to the unit or inexpert / attempted repair.
9.
No fault found – where no fault can be found after extensive
testing, indicating user error or failure in ancillary
equipment.
10. Electronic assemblies which are improperly packed when
returned for repair or service. All electronics assemblies
must be properly packed in ESD protective packing for
transport to prevent physical and ESD damage.
Should any of the above apply, Application Solutions (Safety and Security) Limited reserves the right to raise any relevant charges to
the customer.
Application Solutions (Safety and Security) Limited shall not be liable for any indirect, special or consequential loss or damage
(including without limitation any loss of profits) arising from the use of this product or for any breach of this warranty.
In the interest of continual product development, Application Solutions (Safety and Security) Limited reserves the right to make
changes to product specification without notice or liability.
