CREATING YOUR OWN WASH PRO-
GRAM
1. Press the button
P1
P4
where this program is
to be stored. If you only want to run an occasion-
al program you may select any button.
2. Step forward with the
Menu
- button to the setting
or option you want to change. If the child lock is
activated nothing happens. In that case keep the
button pressed for 3 seconds, then press again as
usual. All program types, settings and options are
described in a separate table.
3. If you want to change a setting step forward
or back with the
button until the desired
setting appears on the display.
4. Then step forward with the
Menu
- button until
the next setting/option, change in the same way if
you so require.
5. Repeat this until the finished program appears
on the screen together with the spin speed, any
temperature and options. The word Stop appears
on the bottom line.
You can now use the program without storing it
(occasional program). Close the door and press
the
-]button to start the program.
Storing the program permanently
If you want to store the program so that it is used
whenever you wash, press the
Enter
- button before
starting. The symbol representing the button you
selected to start with (P1-P4) appears on the
bottom left of the display.
You can now select the program by pressing the
button you selected in Stage 1.
N.B. The option Delayed start and temperatures
over 60°C is not permanently stored.
Instruction regarding EasyControl menu logic
IMPORTANT!
If you store a program by mistake you can reset it
to what it was on delivery, see Reset program, fur-
ther on in this chapter.
HINT!
If you do not want to step through all the settings/
options you can end the feed by pressing the
Enter
-
button ONCE.
To store the program you press the
Enter
-button once
again.
Interrupting the feed
If you change your mind and want to interrupt dur-
ing feeding, switch off the machine with the main
switch
. When you turn it on again you can
start again from the beginning and select any of the
preset programs as usual.
Resetting programs
If you want to return to the setting a preset pro-
gram had when the machine was delivered, you
can reset it.
1. Keep the program button (P1-P4) pressed for
the program you want to reset.
2. Press the
Enter
- button once.
3. Release the program button.
The program for the button has now been reset to
what it was when the machine was delivered.
x
Select
Program type
Super quick wash
< Next >
x
Wool wash rpm
800
Stop
30°
x
Select
Program type
Wool wash
< Next >
