Asko W6864W, Руководство по эксплуатации

Страница: 15 / 32

15
Washing
6
Selecting options
You can select options to adjust the
wash programme to suit your own
specific requirements. The available options
depend on the selected programme. If the
option is available for the selected programme,
the symbol lights up when you press the button.
The machine will remember the options you
select for each programme (applies to Super
rinse, High water level and Super wash). You
can still change the selected options the next
time you select the same programme.
Temperature
• Select the temperature by pressing the -/+
buttons until the desired temperature is
displayed.
• You can select temperatures between
cold (-) and 90 °C. By selecting cold, the
wash temperature will be the same as
the temperature of the water entering the
machine. For Wool/hand wash it is not
possible to select a temperature above 40
°C, when selecting Time program, Synthetics
and Easy Care the maximum temperature is
60 °C.
Spin
• Select the spin speed by pressing the -/+
buttons until the desired spin speed is
displayed.
• You can select speeds between 400 and
1600 rpm, (no spin) or No D(no drain). The
maximum spin speed varies according to the
program selected. The speed is shown in the
display.
• , means that the program does not include
a spin cycle and ends by draining.
• No D, No drain means that the program does
not include a spin cycle and ends with the
water from the final rinse still in the machine.
The washing will remain covered by the water
from the final rinse, stopping it from getting
creased. If you have selected “No drain”,
once the program has ended you must
select the Spin or Drain program to drain the
water from the machine before you open the
washer door.
Delayed start
When you select Delayed start the machine will
start 1-24 hours after you press the Start button.
This option cannot be used with Time program.
• Select Delayed start by pressing the + button
under the time display. Delayed Start is
shown for three seconds.
• By pressing the -/+ buttons under the time
display you can delay the start in whole hours
up to a maximum of 24 hours. The symbol
for Delayed start lights beside the number of
hours.
• Press Start, and the machine counts down
1 hour at a time and starts after the selected
delay.
If you change your mind and want to cancel
Delayed start, you must press and hold the Stop
button for three seconds.
NOTE!
Remember to press the Start button to start the
program..