26
Electrical installation
If the machine is delivered from the factory
with a plug attached it can be connected to an
earthed wall socket. Otherwise, a permanent
connection using a multipolar circuit breaker
must be made by a quali
fi
ed professional.
Connection on delivery
• 230V, 1-Phase, 10A
• 50Hz
• Use a type A residual-current device.
NOTE!
Do not connect the machine to the mains
electricity supply by an extension lead.
Coin operation
The machine is prepared for coin operation.
Such installation must be carried out by a
quali
fi
ed professional.
The installation requires a connection cable to
power the coin meter. This connection cable
can be ordered using the factory art. no. 92 090
95. The coin meter shall be able to short circuit
two signal lines for periods of up to 10 minutes.
This is to give the user time to load the machine,
choose a programme and start the programme
after putting the coins in.
"Insert coin" appears on the display when the
machine is started with the main power switch.
Installation
