18
Care and cleaning
Cleaning the auto
fi
lter (depending
on model)
Clean the
fi
lter at the intervals shown on the
machine's display or more often
1. Pull the condensed water container out and
up.
2. Unscrew and remove the auto
fi
lter.
Sealing
3. Rinse the auto
fi
lter clean with water.
4. Screw the auto
fi
lter back into place. Check
that the seal is properly seated.
NOTE!
Clean the
fi
lters after each drying.
Do not replace the
fi
lters if they are damp or
wet. Damp or wet
fi
lters could cause operational
faults.
NOTE!
The dryer should never be operated without
the
fi
lters in place, or with damaged
fi
lters as
excessive amount of accumulated
fi
bres from
the fabric could cause malfunction or failure of
the dryer.
Cleaning the outside of the machine
Clean the outside of the machine and the
programme panel with a mild cleaner. Do
not use solvents, as these can damage the
machine. Do not hose down or spray the
machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble
dryer clean and cool; dust, heat and moisture
prolong drying times.
