19
Troubleshooting
The machine will not start
Check
• that the door is properly closed.
• that the main power switch is on.
• that the plug is connected.
• that the main fuses have not blown.
The machine loses all power during a
programme
Contact the service division.
The machine leaks water
Check that the auto
fi
lter and its seal are
installed correctly and not faulty.
Drying takes too long
• Check that the lint
fi
lter is not blocked. See
the Care and cleaning chapter.
• Empty the condensed water container.
Clean the evaporator
fi
lter (net
fi
lter + foam
fi
lter), evaporator, lint
fi
lter and auto
fi
lter, see
chapter Care and cleaning.
Error messages
• If Over Flow appears on the display, the
condensed water container is full or the
evaporator
fi
lter is blocked. Empty the
container, clean the
fi
lter and restart the
machine. See the Care and cleaning chapter.
• Read Drying takes too long in this chapter if
Max program time appears on the display.
• If Clean Lint Filter appears on the display,
clean the lint
fi
lter.
• If Clean condenser appears on the display,
clean the evaporator. See the Care and
cleaning chapter.
• If Clean auto
fi
lter appears on the display,
clean the auto
fi
lter. See the Care and
cleaning chapter.
• Call the service division if Thermistor fault
appears on the display.
• Press the Stop button to close any error
messages.
