If your electrical wiring or circuit breakers do not
meet the specified current draw on the rating
plate, the current limiter can be activated by
reducing the value of this setting. Doing so may
cause a reduced performance of the induction
hob.
Con
- Current limiter
(connection to power grid)
The following numbering format of the setting is
available: X.XX. The number left of the dot
represents the number of connected phases,
while the number right of the dot represents the
electrical current per phase in Ampere.
In demo the appliance will act as usual, without
the possibility to heat the cookware.
dE
- Demo Mode
(Demo Mode for Dealer Showrooms)
When set this will be indicated after switching
on the appliance with a short "d" indication;
Without any user interaction the appliance will
automatically switch off after 10 minutes.
WARNING!
The appliance must always be set to the actual or lower rating of the electrical wiring or circuit
breakers. This setting can only be set by an authorised expert.
49
Settings