About the Hestan Cue App:
•
The Hestan Cue app is going to help you cook better food more often by acting as your GPS in
the kitchen. You'll learn new techniques, novel combinations, and gain a sense of confidence
in what you're cooking. The first few times you cook with the Hestan Cue app it may feel a bit
unusual to give up the routine of checking and adjusting the power level all the time, but if you
trust the system and follow the directions you'll end up with an amazing meal.
•
Our recipes lead you through the process of 'Mise En Place' where you'll gather and prepare
all of your ingredients in advance. This is particularly important when cooking with the Hestan
Cue app as each recipe has been carefully timed out to give you the perfect results (we don't
want your salmon burning while you search for the garlic!).
•
Many recipes in the Hestan Cue app will ask you to select a thickness for your protein. It is
important to measure carefully and accurately as your Hestan Cue will calculate cook-times
based on the number. We recommend measuring from the thickest part of your dish for the best
results, but you should get a feel for what works best with your preferences.
•
Tempering is another technique used in the Hestan Cue app to make sure your meat cooks
properly. Steaks, chops, and filets cook more evenly when they are put in the pan at room
temperature. So we typically advise leaving your meat unwrapped on the counter for 15-20
minutes before cooking it. Usually by the time your sauce is done your meat should be good to
cook!
Skip a cooking step
To skip a current step in the App the Hestan Cue key can be pressed for about 1 second.
Switching off the cooking zone
Switching off a Hestan Cue controlled zone is possible by setting it none temperature set-point via
the Slider tuning left. A dash will be shown. Alternatively an element of the Slider or the desired
Hestan Cue key can be pressed for at least 3 seconds to deactivate the Hestan Cue mode completely.
INFORMATION!
You can use the Hestan Cue programs on two different zones simultaneously, while the App can
be assigned to only one cooking zone. Hestan Cue programs are working only on Bridge zones.
INFORMATION!
While the Celsius°Cooking™ probe is used to control the temperature of the content inside a pan
(e.g. water or soup) the Celsius°Cooking™ cookware is controlled on the pan bottom temperature.
Due to this there is always an offset between set-point and actual temperature of the content
INSIDE the cookware. When e.g. trying to boil a liquid on the Celsius°Cooking™ cookware it may
be necessary to set a higher temperature to reach the boiling point. Reaching the boiling point
is also further dependent on the volume of the liquid and whether a lid is placed on top of the
cookware. Furthermore, regular stirring improves this behaviour, even when cooking with the
probe.
40
Operation
