Assigning the cookware to the cooking zone
Switch the hob on and wait till the end of the the start up animation.
Place the Celsius°Cooking™ cookware or a regular pot fitted with the Celsius°Cooking™ probe on
a desired cooking zone. After it has been detected, quickly tap twice with your fingertip on the handle
cap sensor or the probe housing to activate it. Right after the Hestan Cue mode key
will light
up. To assign the probe the Hestan Cue mode key button
will light up on every possible cooking
zone. Press the Hestan Cue mode key
on the needed cooking zone. The Hestan Cue menu
will be opened. With a short press again it can be closed.
INFORMATION!
Please make sure that the appliance is already switched on before placing the Celsius°Cooking™
cookware so that the system can clearly identify its position.
Cooking with the embedded Hestan Cue programs
The hob comes along with integrated Hestan Cue programs, optimized for Celsius°Cooking™
cookware. With the opened menu 3 different cooking methods can be chosen, with different
temperature ranges. When use probe only shows 2 Hestan Cue methods. Use the one that’s fits the
desired purpose:
Heating up and frying
This program is to reach high temperatures rapidly. Always add oil or butter before starting it. For
healthy cooking don’t exceed the smoke point of the used oil.
Boiling or cooking with water
This program is to reach higher water temperatures quick. Always add water to the cookware before
starting it.
Slow cooking or sous vide
This program is to control low to medium temperatures, preventing high bottom temperatures. Larger
quantities and thicker dishes need to be stirred occasionally to ensure a homogeneous heat
distribution.
Using the probe as a cooking thermometer
When a Celsius°Cooking™ probe is recognized it can also be used as a thermometer to just monitor
e.g. the core temperature of a certain dish.Fiirst you have to lift and put down the pan again. Therefore
assign the probe to an already operating cooking zone, may be in level cooking or running a PLUS
menu program. The measured temperature is displayed dimmed.
Switching off the cooking zone
Touch the slider for the selected cooking zone and hold it for 3 seconds. The sign
will appear on
the display.
38
Operation