20
Upper heater
The heat is radiated only by the heater installed in the
upper wall of the oven. Use this operation mode only
when the upper side of the dish should be cooker more
thoroughly (e.g. for additional browning).
Preset temperature 150°C.
Selecting / setting the oven temperature
• After selecting thy type of food or oven operation
mode, the preset temperature can be adjusted.
– Touch the (I) key, which will start to
fl
ash.
– Use the (H) “+,
-
” keys to set the oven temperature
in the interval from 30 to 275°C, depending on the
oven operation mode, in 5°C steps.
– Con
fi
rm the setting by touching the (I) key again; if
the (I) key is not pressed, the setting will be adopted
automatically after a few seconds.
• You may also set the cooking duration, end of cooking
time, or delayed cooking start (see section “Timer
functions”).
• When all desired parameters have been set, press
the (C) “Start/stop” key to activate the oven.
• The temperature display (I) will indicate the
rising temperature in the oven. When the preset
temperature is reached, a beep will sound and the
symbol (I1) will go o
ff
.
• If no timer function was selected, the time elapsed
since the start of the baking / cooking process is
indicated incrementally on the display (D).
NOTE!
During oven operation, you may change the
temperature (see section “Selecting and setting
the oven temperature”), timer functions.
After the end of cooking and when the oven is
turned o
ff
, the temperature display will indicate
the falling temperature until it reaches 50°C.
B Cooking by selecting the type of food (L) (only
with control unit 2)
This operation mode enables preparing food by
automatic setting of the heating system, temperature,
and cooking duration.
• Touch the food type selection key (L) to select the
type of food (the corresponding food symbol will
light up, along with the relevant heating system,
cooking level /shelf height, temperature, and cooking
duration).
• There is also use the option to set the end of cooking
time, or delayed cooking start (see section “Timer
functions”). Press the (C) key “start/stop” to turn on
the oven.
• The temperature display (I) will indicate the
rising temperature in the oven. When the preset
temperature is reached, a beep will sound and the
symbol (I1) will go o
ff
.
• The set operation time will count down; after it has
elapsed, the oven will go o
ff
.
Preset temperatures and oven operation times can be
changed to any desired setting.