82
Note: After successful networking, it is no need to reset while use the projector after power
is cut off. You only need to open file “projectorWLAN.exe”, and click "Connection".
Width of the horizontal integration:
It indicates the width of horizontal integration. Generally, input 150, subject to adjustment. The
width ranges 0-400. The greater the value is, the wider the integration band will be. Take “2x1”
blending (the right of the left projector image blendingd with the left of the right projector image).
We input “1” in the position of this projector, and 150 in horizontal integration band width. It
indicates that the right integration band width of the 1st projector in horizontal direction is 150;
if we input “2” in the position of this projector, and 150 in horizontal integration band width, it
indicates that the left integration band width of the 2nd projector in horizontal direction is 150.
Gamma:
It indicates the brightness and line fuzziness of the integration band. The value ranges from 0 to
12 subject to adjustment. The recommended value is 5.
R/G/B:
It indicates that the brightness of R, G and B may be adjusted. The value ranges from 0 to 1023.
The greater the value is, the brighter it will be. This setting is used for adjusting the brightness
difference between two or more than two projectors.
ZIGBEE Networking Instructions
Connection