49
Factory default
This function returns all setting values except for the User logo, PIN code lock, Logo PIN code
lock, Lamp counter and Filter counter to the factory default settings.
Date and time
This function is used to check or reset current date and time.
Current Time.......Check the current date and time.
Reset Time.........Reset the current date and time.
Regular boot
This function is used to open or close the regular boot function or set the regular boot time.
On ....... Regular boot function is set to "On", setting interface appears, you can arbitrarily set a
regular boot time.
Off ....... Close regular boot function. In this case, the timer function is not optional.
Regular shutdown
This function is used to open or close the regular shutdown function or set the regular shutdown
time.
On ....... Regular shutdown function is set to "On", setting interface appears, you can arbitrarily set
a regular shutdown time.
Off ....... Close regular shutdown function. In this case, the timer function is not optional.
Remote control
The projector is assigned 10 different remote control codes (Code 0-9), which are default initial
code (Code 0) and another 9 codes (code 1-9).
Code set on the projector and remote control should be the same. For example, when using code
7 to operate the projector, remote control code also must be switched to Code 7
.
Change the projector's code: Select "Remote control" in advanced setting menu
Change the remote control code: Press the OK button and a number key (0-9) on the remote
control for more than 5 seconds to switch the codes.
Note:
- If the code set on the projector and remote control is different, it will not execute any operation.
In this case, switch the remote control code to the same code as that of the projector.
- If the battery is removed for a long period of time from the remote control, the remote control
code will be reset.
Note:
Regular boot and shutdown format is "hour: minute" . if the current time is "16:00", you set
"18:05" as regular shutdown time, it means that the projector will automatically shut down at
18:05.
Advanced setting