manualshive.com logo in svg

Ask Proxima E3000 series, Руководство пользователя, Страница: 52 / 87

Поделиться
Скачать
Ask Proxima E3000 series Скачать руководство пользователя страница 52

52

Air filters

Maintenance and cleaning
Cleaning the air filter

The air filter prevents dust from accumulating on the surface of the optical elements inside 

the projector. Should the air filter become clogged with dust particles, it will reduce cooling 

fans’ effectiveness and may result in a buildup of internal heat and adversely affects the life of 

the projector. If the Filter warning icon appears on the screen, the air filter should be cleaned 

immediately. Clean the air filter following the steps below.

1 Turn off the projector, and unplug the AC 

    power cord from the AC outlet.

2  Press the air filters lightly, the air filters will 

    pop pout automatically, Remove the air 

    filters.

3  Gently clean the air filters with a brush.

4  Reinstall the air filters into the projector 

    properly. Please ensure that the air filters 

    are intalled completely into the projector.

Caution

Do not operate the projector with 

the air filter removed. Dust may 

accumulate on the optical elements, 

degrading image quality.

Do not put any small objects into the 

air intake vents. Otherwise, it may 

result in malfunction of the projector.

Recommendation

We recommend avoiding dusty/smoky

environments when you operate the projector.

Usage in these environments may cause poor

image quality.

When you use the projector under dusty or

smoky conditions, dust may accumulate on the

lens  or optical elements inside the projector. 

When the symptoms above are noticed, contact 

your authorized dealer or service station for 

proper cleaning.

Resetting the filter counter

Be sure to reset the filter counter after cleaning 
or replacing the filter.

1. Press Menu on the remote control to display 

   the on screen menu. Press 



 to select the 

   icon for the Advanced setting menu. Then 

   press  

 or press OK.

2. Press 



 to select Filter counter, and then 

   press 

 or press Select. Press 



 to select  

   Reset Filter, then press OK. At the time, 

   you will see the prompt information “Filter 

   counter Reset?” displayed on the screen.   

    Select Yes.

3. When another dialog box pops up, you 

    should select Yes and reset the filter.

Содержание E3000 series
























































































Отзывы:

Нет отзывов