Ashton Bentley Boardroom one70, Руководство пользователя и инструкция по установке

Страница: 9 / 86

IV
Ashton Bentley Boardroom one70 User and Installa on Manual
Important Safety Instruc ons
When using your Ashton Bentley equipment, the following safety precau ons should always be
followed to reduce the risk of fi re, electric shock or injury to people.
• Read and understand all instruc ons provided.
• Follow all warnings and instruc ons marked on the equipment.
• Some parts are heavy! Observe good li ing prac ces. The screen module should only be li ed and
posi oned by two persons.
• Allow plenty of space in the construc on area and remove cartons and any packaging materials
before assembly.
• The base unit features threaded rods that protrude to allow the main chassis unit to be easily
located. Take care not to stand on these during assembly.
• Ensure that “slot down” items such as the display assembly and loudspeaker bar are fully located
in their bo om posi on. Ensure all AB knobs are fully ghtened before moving onto the next part
of the assembly.
• The system must be located in an indoor, dry loca on. Never operate the system outdoors or very
humid condi ons.
• Never expose the system components to rain or allow ingress of fl uid of any sort.
• Always hold and li the screen module by the metal edge. Do not touch the screen module glass.
• Do not lay loose cables across a fl oor - this is a trip hazard! Always use suitable cable management
or install under a raised fl oor.
• Do not clean the screen glass with solvents or any other chemicals. This will destroy the surface
and invalidate the warranty. Wipe gently with a so , lint free clean dry cloth. If that does not work
try a screen cleaning solu on on cloth, never spray directly on to the screen.
• In case of any queries, please contact your approved vendor.
• Power switch on rear of system MUST BE accessible at all mes.
• Ensure that the system earth bonding is correctly installed. (Only valid on Connect two55 &
Boardroom two70)
• It is essen al that the system be secured to a suitable wall/par on using the wall fi xing kit
supplied when using the slim base.
PLEASE READ AND SAVE THESE INSTRUCTIONS