ashtech GG Surveyor, Справочное руководство

Страница: 91 / 256

Command/Response Formats 73
Com
m
and
s
Position
Computation
$PASHS,DTG Set GLONASS system time shift relative to GPS sys-
tem time 79
$PASHS,FIX Set altitude hold position fix mode 83
$PASHS,GTF Set GLONASS system time shift hold position fixed
mode 85
$PASHS,GTM Compute/hold GLONASS system time shift 86
$PASHS,GTP Set priority of GLONASS system time shift if SVs = 4 86
$PASHS,PEM Set elevation mask for position computation 96
$PASHS,PMD Set position computation mode 97
$PASHS,PPO Point Positioning Command 100
$PASHS,SVP Designate satellites to used for position computation 108
$PASHQ,SVP Display satellites used for position computation 109
$PASHS,USP Select specific satellite to use for position computation 113
Receiver
Configuration
$PASHS,CTS Port protocol 78
$PASHQ,CTS Query port protocol settings 78
$PASHS,DSY Configures receiver serial ports in daisy-chain mode 78
$PASHS,DTM Set datum for position computation 79
$PASHS,LPS Set loop tracking parameters 91
$PASHQ,LPS Display loop tracking parameter setting 91
$PASHS,MRX Set transformation matrix from PZ-90 to WGS-84 92
$PASHQ,MRX Query transformation matrix 93
$PASHQ,PAR Query receiver parameters 94
$PASHS,POP Position computation rate 97
$PASHQ,PRT Request port baud rate 101
$PASHQ,RID Request receiver identification 103
$PASHQ,RIO Request for receiver ID 104
$PASHS,SMI Set code smoothing 105
$PASHS,SMV Set speed filtering 106
$PASHS,SPD Set speed (baud rate) of serial port 107
$PASHS,SYS Set system (GLONASS/GPS/Mixed) 109
$PASHS,TSC Set type of time scale used 110
$PASHQ,TSC Display time scale setting 110
$PASHS,UDD Set user-defined datum 110
$PASHQ,UDD Display user-defined datum 112
Table 6.2: Receiver Set/Query Commands (continued)
Function Command Description Page