ashtech GG Surveyor, Справочное руководство

Страница: 101 / 256

Command/Response Formats 83
Com
m
and
s
Special case: command $PASHS,FIL,D,999 deletes all files including the current
file, and opens a new current file.
Parameter y is available only for command $PASHS,FIL,D, not for $PASHS,FIL,C.
If the current file has zero length, command $PASHS,FIL,C does not create a new file. Instead an
old file will be kept as current.
If the maximum number of files (100) is reached, command $PASHS,FIL,C is disabled (NAK returns
as response for this command).
Examples: Close the current file
$PASHS,FIL,c<Enter>
Delete file number 4
$PASHS,FIL,D,3<Enter>
FIX: Altitude Fix Mode
$PASHS,FIX,x
Set altitude hold position fix mode for the altitude used (for 2- D position
determination), where x is 0 or 1.
x = 0 (default), the most recent antenna altitude is used in altitude hold
position fix. The altitude is taken from either the altitude entered by the $PASHS,POS
command, or the last one computed when VDOP is less than VDOP mask.
x = 1, only the most recently entered altitude is used
Example: Fix using most recent altitude
$PASHS,FIX,0
FLS: Receiver File Information
$PASHQ,FLS,d
This command requests file information from the memory card, where d is the
beginning file index number and can range from 0-99. The file index number is a
sequence number where the first file has a file index = 0, the second file has a file
index = 1, and continuing through to the 100th file which has file index number of 99.
The output displays files in blocks of up to 10 files. If d is greater than the highest file
index number, then the command will not be acknowledged (NAK is returned).