manualshive.com logo in svg

ashtech GG Surveyor, Справочное руководство

Поделиться
Скачать
ashtech GG Surveyor Скачать руководство пользователя страница 131

Command/Response Formats

 113

Com

m

and

s

c = 

Y to use, N to not use

By default, all satellites are turned on (set to Y). 

Example:  Use (track) satellite 15

$PASHS,USE,15,Y<Enter>

USP: Select Satellite to Use in Position Computation

$PASHS,USP,d,c

This command selects an individual satellite to use in position computation, The 
structure is $PASHS,USP,d,c, where:

d = 

ID number of satellite, 1-32 for GPS, 33-56 for GLONASS

ALL = all satellites

GPS = GPS satellites only

GLO = GLONASS satellites only 

c = 

Y to use, N to not use

By default, all satellites are turned on (set to Y)

Example:   Do not use Satellite 4

$PASHS,USP,4,N

UTS: Synchronize with GPS Time

$PASHS,UTS,s 

This command enables (s=ON) or disables (s=OFF) a mechanism that synchronizes 
measurements and coordinates with GPS system time rather than with local (receiver) 
clock. This means that the calculated pseudo-ranges do not depend upon the receiver 
clock stability. This mode simulates a configuration where the receiver has a quartz 
oscillator with very high stability and is synchronized with GPS. Default is OFF.

$PASHQ,UTS,x 

The associated query command is $PASHQ,UTS,x, where x is the port where the 
reply will be sent. Note that x is not required to direct the response message to the 
current communication port. 

If processing raw data from the receiver with your own processing algorithms, we recommend that 
you turn UTS on.

$PASHR,UTS,x

The receiver response message to this query command is in the form:

$PASHR,UTS,x*cc 

where x is ON or OFF and *cc is the checksum.

Содержание GG Surveyor

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды