ashtech GG Surveyor, Справочное руководство

Страница: 90 / 256

72 GG Surveyor GPS+GLONASS Reference Manual
Table 6.2 lists the receiver set and query commands alphabetically by function, and
then alphabetically within each function. Each command is described in detail in
alphabetical order.
Table 6.2: Receiver Set/Query Commands
Function Command Description Page
Antenna Position
$PASHS,ALT Set ellipsoid height of antenna 75
$PASHS,POS Set antenna position 98
$PASHS,POS,CUR Set antenna position to current computed position 98
Dilution of
Precision (DOP)
$PASHS,HDP Set HDOP mask for position computation 86
$PASHS,PDP Set PDOP mask for position computation 95
$PASHS,TDP Set GLONASS system time shift DOP mask 109
$PASHS,VDP Set VDOP mask for position computation 114
Ionosphere
$PASHS,ION Include/exclude ionospheric model 89
$PASHQ,ION Display ionosphere data information 89
Memory
$PASHS,CLM Clear the data files from the data card 77
$PASHS,INI Clear receiver memory and data 89
$PASHS,RST Reset User Parameters 105
$PASHS,SAV Save parameters in battery-backed-up memory 105
Miscellaneous
Commands
$PASHS,AIM Set RAIM mode 74
$PASHQ,CLK Query receiver clock status 76
$PASHS,LTZ Set local time zone 92
$PASHS,POW Set battery parameters 98
$PASHQ,POW Query battery parameters 99
$PASHS,SNR Set algorithm for SNR computation 106
$PASHQ,SNR Display SNR setting 106
External
Frequency/
Photogrammetry/
1PPS / Strobe
$PASHS,EXF Set external frequency 81
$PASHQ,EXF Query external frequency setting 82
$PASHS,PHE Set photogrammetry edge 96
$PASHQ,PHE Display the photogrammetry parameters 96
$PASHS,PPS Set period and offset of 1 PPS signal 100
$PASHQ,PPS Display 1PPS parameters 100
$PASHS,STB Set measurement strobe parameters 107
$PASHQ,STB Display measurement strobe parameters 108