Ashly nX1502 Скачать руководство пользователя страница 20

Страница: 20 / 60

Operating Manual - nX, nXe, and nXp 150W/75W Power Amplifiers

9.4 Device Control Tabs

The following device control tabs are available for each amplifier. The tabs include control surface, security, network properties,

DSP, input source, meters, meter dynamics, meters autoleveler, metering, event scheduler, and fault log.

9.4a Software Control Surface - Global

The control surface is the main user interface for the amplifier section. DSP functions, if available, are managed from the DSP tab. The

following amplifier functions are available in the control panel:

Name

- The user defined name for this specific amplifier. Up to 20 characters can be used.

Model

- The model of amplifier being addressed

Power

- Shows power status as on, off, or standby.

Power On/Standby

- This

shows power status and allows

the user to set power to standby from software. Standby can

also be controlled by a rear panel contact closure or by the

event scheduler

. The front panel power switch blinks when

in standby.

Power Switch & Level Control Enabled/Disabled

This disables both the front panel power switch and the rear

panel level controls.

Note: When disabled, all level controls

revert to their maximum (fully on) value regardless of knob

position

he software control surface representations of the rear panel level

controls (labeled as Rear Attenuators) will always show the current

physical position of the rear panel level controls, whether they are

enabled or disabled. See image on next page.

Remote Attenuator Enabled/Disabled

- This separate function disables all DC level control Euroblock connectors on the

amplifier back panel

Internal Amplifier Ambient

- On a live amplifer only, this indicates the current internal temperature.

DIP Switch Settings

- Each amplifier channel has a six position rear panel DIP

switch for setting hi-pass filter (HPF), limiter, gain, and output mode for that chan

nel. Current DIP switch positions and parameters are displayed on the software

control surface. Note: HPF status is unavailable to the software and is not shown.

9.4a - Control Surface Global Functions

9.4a - DIP Switch Settings

Содержание nX1502





























































Результаты поиска

Содержание nX1502

Отзывы:

Похожие инструкции для nX1502

Бренды по названию

Популярные бренды

Ashly nX1502, Руководство по эксплуатации

Результаты поиска

Содержание nX1502

Отзывы:

Похожие инструкции для nX1502

Бренды по названию

Популярные бренды