Ashley AW180Bli, Руководство владельца по эксплуатации и инструкции

Страница: 9 / 28

9
COMBUSTION AIR ASSEMBLY INSTRUCTIONS
This appliance requires a source of combustion air. If your home is of tight construction or has negative
pressure problems, you will need an outside source of air. Below is a list of possible indicators that a source of
outside combustion air may be required.
1. Your stove does not draw steadily, smoke rollout occurs, wood burns poorly, or back-drafts occur whether
or not there is combustion present.
2. Existing fuel-fired equipment in the house, such as fireplaces or other heating appliances, smell, do
not operate properly, suffer smoke roll-out when opened, or back-drafts occur whether or not there is
combustion present.
3. Opening a window slightly on a calm (windless) day alleviates any of the above symptoms.
4. The house is equipped with a well-sealed vapor barrier and tight fitting windows and/or has any powered
devices that exhaust house air.
5. There is excessive condensation on windows in the winter.
6. A ventilation system is installed in the house.
Intake Venting Kit Installation
If an outside air intake is required. You have two options. You may cut a rectangular hole in the floor of your
home and the floor protector, or purchase a standard 4” Dryer Vent kit from your local hardware supply store
and install it on the rear of the pedestal.
If using a Intake venting kit, the outlet cover must be of a design that DOES NOT close by means of a flap or trap door.
You must purchase a style that allows a continuous in-flow of air and that has a rodent screen.
“Intake Venting Kit” installation:
First using a pair of pliers or other means, remove the metal plate from the back of the pedestal and bend
the tabs out. Follow the manufacturer’s installation instructions for attaching the dryer vent kit to the home.
Then attach it to the appliance.
Ventilation