background image

Owner’s Operation and Instruction Manual

SAFETY NOTICE:

If this heater is not properly installed, a house fire 

may result.  For your safety, follow the installation 

instructions. Never use make-shift compromises 

during the installation of this heater. Contact local 

building or fire officials about permits, restrictions 

and installation requirements in your area.

CAUTION!

Please read this entire manual before you install or 

use your new room heater. 

Failure to follow instruc-

tions may result in property damage, bodily injury, 

or even death.

Improper Installation Could Void

Your Warranty!

CERTIFIED FOR USA and CANADA

SAFETY TESTED TO UL 1482-2010 and ULC-S627-2000

WASHINGTON STATE APPROVED

United States Stove Company

227 Industrial Park Road

P.O. Box 151

South Pittsburg, TN 37380

SAVE THESE INSTRUCTIONS

THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU TO ORDER 

REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

851879F-1701G

MODEL: 3000 (L), (LN)

French version is available for download from the United States Stove Company website: http://www.usstove.com/

La version française est disponible pour téléchargement à partir du site United States Stove Company: http://www.usstove.com/

U.S. Environmental Protection Agency 

Certified to comply with 2015 particulate emissions standards.

Summary of Contents for 3000 L













































Reviews: