Ashida ADR141A Скачать руководство пользователя страница 31

Страница: 31 / 151

ADR141A /
ADR241A

Doc ID : ADR241A_IM_01

Ref ID : ADR241A/IM/I&P

Rev No. : 02

Page No. : 31 of 150

INSTALATION AND PROCEDURE

2.1

Overview

The first steps in applying the ADR141A/ ADR241A Feeder Protection Relay are installing

and connecting the relay. This section describes common installation features and

requirements.

To install and connect the relay safely and effectively, user must be familiar with relay

configuration features and options. User should carefully plan relay placement, cable

connections, and relay communication.

This section contains drawings of typical ac and dc connections to the ADR141A/ ADR241A.

Use these drawings as a starting point for planning your particular relay application.

2.2

Handling

2.2.1

Handling the Goods

Our products are of robust construction but require careful treatment before installation on

site. This section discusses the requirements for receiving and unpacking the goods, as well

as associated considerations regarding product care and personal safety.

Caution: Before lifting or moving the equipment, user should be familiar

with the Safety Information chapter of this manual.

2.2.2

Receipt of the Goods

On receipt, ensure the correct product has been delivered. Unpack the product immediately

to ensure there has been no external damage in transit. If the product has been damaged,

make a claim to the transport contractor and notify ASHIDA promptly.

For products not intended for immediate installation, repack them in their original delivery

packing.

2.2.3

Unpacking the Goods

When unpacking and installing the product, take care not to damage any parts and make

sure that additional components are not accidentally left in the packing or lost. Do not discard

any CDROMs or technical documentation. These should accompany the unit to its

designated substation and kept in a dedicated place.

The site should be well lit to aid inspection, clean, dry and reasonably free from dust and

excessive vibration. This particularly applies where installation is being carried out at the

same time as construction work.

Содержание ADR141A
























































































































































Результаты поиска

Содержание ADR141A

Отзывы:

Ashida ADR141A, Инструкция по эксплуатации, Страница: 31 / 151

Результаты поиска

Содержание ADR141A

Отзывы: