AsGa LD ONU 500
User Guide
Configuration
16
3.5 Displaying File System
LighDrive ONU 500 flash system has a flash memory capacity of 32 Mb. This memory cannot
be formatted by the user. Use the “dir” command at privilege level to inspect your file system. The
following command (dir) shows a typical file system:
As you can see there are several files stored at Flash system but just some of those files are
used under the current system configuration. The process to select the running files on the system is
described below:
3.6 Displaying your Booting Process
Command
Show boot
Description
Your system boot using an image file (System) plus a configuration file in order to operate. You
can assign at any time and any combination of booting files to boot your system.
The only way to change a file is making a new download to the system. At the current software
version there is no way to change your booting process from ONU CLI. The downloaded image will be
activated as soon the download process finish.
In case of a corrupted image or any problem during the booting process with the new image the
before booted image will take place. A roll back process will happen.
Mode
Exec mode
Router#
dir
4.3M LightDrive-ONU500-SYSTEM-RH-1.2.bin
3.0M LightDrive-ONU500-SYSTEM-1.0.1-GD.bin
3.0M LightDrive-ONU500-SYSTEM-1.0.2-GD.bin
2.9M LightDrive-ONU500-SYSTEM-1.0.0-GD.bin
369 default.conf.sav
368 default.conf
292 swdl_1.0.2-GD.cfg
286 swdl_RH-1.2.cfg
235 swdl_1.0.1-GD.cfg
37 first.log
0 production.log
Flash disk space:
| Total | Used | Free
| 32.0M | 14.4M ( 45% ) | 17.6M
