AEU-925
Versatile Control Technology
TM
12.
Library Button
- Cont’d
:
Press 1 repeatedly until desired File Series is displayed, then press 2 to select Series. The
following options will be displayed:
Do you want to load the whole series?
Press: 1=Yes, 2=No, Mode=Escape
Press 1 to load the entire series, or press 2 to go to next menu which allows just one file within
the series to be loaded.
Preset Buttons 1-6
The six Preset buttons can store a total of 12 different system settings: 6 in Endo Mode, and 6
in Implant Mode. Each button is preprogammed at the factory with default presets, however,
custom settings can also be reprogrammed into each button by the user:
Factory Default Presets
In Endo Mode, the factory default presets enable selection of six different file series from the
File Library. After selecting a file series, repeatedly press the same Preset Button to step
through the different file sizes in that series.
In Implant Mode, the factory default presets enable selection of six different handpiece ratio,
speed, torque, and gear efficiency configurations.
NOTE: The default Preset Button settings will be restored when the unit’s factory default settings are
recalled or when the unit has been reprogrammed with new software.
Reprogramming Preset Buttons with User Defined Settings
Endo Mode:
After setting up the system to the desired Endo mode parameters, press the Library button. The
following options will be displayed:
Do you want to access the file library?
Press: 1=Yes, 2=No, Mode=Escape
Press 2 to not access library. The following options will be displayed:
Record as a user defined preset?
Press: 1=Yes, 2=No, Mode=Escape
Press 1 to record current settings as a user defined preset. The following options will be
displayed:
Select Preset Key to be Programmed
or press Mode to escape.
Press one of the six Preset buttons to save the current settings to that button.
Implant Mode:
After setting up the system to the desired Implant mode parameters, press the Library button.
The following options will be displayed:
Record as a user defined preset?
Press: 1=Yes, 2=No, Mode=Escape
Press 1 to record current settings as a user defined preset. The following options will be
displayed:
Select Preset Key to be Programmed
or press Mode to escape.
Press one of the six Preset buttons to save the current settings to that button.
Advanced Operation Functions
- Cont’d
