background image

AEU-925 

Versatile Control Technology

TM

TABLE OF CONTENTS:

Specifications  . . . . . . . . . . . . . . . . . . . . . . .2

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . .3

Package Contents  . . . . . . . . . . . . . . . . . . . .3

Preparing The Unit  . . . . . . . . . . . . . . . . . . .4

Irrigation Set Up  . . . . . . . . . . . . . . . . . . . .4-5

Quick-Start Operation  . . . . . . . . . . . . . . . . .6

Calibration  . . . . . . . . . . . . . . . . . . . . . . . . . .7

System Setup Menu . . . . . . . . . . . . . . . . .8-9

Advanced Operation & Functions  . . . . . . . .9

Torque Controls  . . . . . . . . . . . . . . . . . . . . .10

Irrigation Pump Controls  . . . . . . . . . . . . . .11

Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Library Access  . . . . . . . . . . . . . . . . . . . . . .11

Preset Button Operation  . . . . . . . . . . . . . .12

Library Settings  . . . . . . . . . . . . . . . . . . . . .13

Voltage Selection . . . . . . . . . . . . . . . . . . . .14

Sterilization and Maintenance  . . . . . . . . . .15

Warranty  . . . . . . . . . . . . . . . . . . .Back Cover

SPECIFICATIONS:

Console Size:

3.75” x 9.5” x 8.25”

(9.5 cm x 24 cm x 21 cm)

Console Weight:

7.2 lbs (3.24 kg)

Power Source:

Dual Voltage
115V or 230V AC

Power Rating:

115V/60Hz 1.6A
230V/50Hz 0.8A

Note:

For reliable grounding, connect to receptacle marked

“Hospital Grade”.

Classifications in accordance with UL-2601-1:

Class I

Type B Applied Parts

Ordinary Protection

Not suitable for use in the presence of a flammable anaesthetic

mixture with air or with oxygen or nitrous oxide.

Intermittent Use – Duty cycle:

With water: 2 minutes on, 1.5 minute off.

Without water: 1 minute on, 5 minutes off

Note:

The power supply cord is the mains appliance disconnect

means.

To prevent injury to people and damage to
property, please heed relevant warnings and
remarks. They are marked as follows:

WARNING:

Serious injury or death may
result if ignored.

CAUTION:

Damage to property or the
environment may result if
ignored.

NOTE:

Important additional
information and hints.

P.O. Box 1548 • Woodinville, WA 98072

(425) 487-3157 • (800) 426-5913

www.aseptico.com • Email: [email protected]

MEDICAL EQUIPMENT WITH RESPECT
TO ELECTRIC SHOCK, FIRE AND
MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL 2601-1
CAN/CSA C22.2 No. 601.1

Caution: This device has been tested and found to
comply with the limits for medical devices to the IEC
60601-1-2:1993, EN 60601-1-2:1994, Medical Device
Directive 93/42/EEC. 

These limits are designed to provide reasonable protection
against harmful interference in a typical medical installation.
However, because of the proliferation of radio-frequency trans-
mitting equipment and other sources of electrical noise in
healthcare environments (for example, electrosurgical units,
cellular phones, mobile two-way radios, electrical appliances,
and high-definition television), it is possible that high levels of
such interference due to close proximity or strength of a source,
may result in disruption of performance of this device.

41EJ

0459

Содержание VCT AEU-925

















Отзывы: