5
A. Front view
B. Front cover
C. Washable Prefilter
D. Compound filter (true HEPA + Activated carbon)
E. Ultraviolet Germicidal Lamps (×2)
F.
Photocatalytic Oxidation Chamber
G. Fan
H. Side air flow inlet
I.
Power Button (On/Off)
J.
Air flow outlet
K. Function buttons
L. LED Display
M. Remote control signal receiver
N. Dust sensor
O. Front panel
P. Odor sensor
Q. Front air flow inlet
R. Remote control
2. Filters and Purification Stages
2.1. Washable Prefilter
Captures larger particles such as dust, pollen, mold, pet dander and hair to prolong the life of the HEPA
filter and can be hand washed (rinsed) when dirty.
2.2. True HEPA Filter
This unit features a combination filter that consists of two layers with the first being a true HEPA filter and
the other is an activated carbon. The true HEPA filter captures particulates as small as 0.3micron including
germs, bacteria, viruses and other airborne contaminants. The carbon filter removes odors.
2.3. Ultraviolet Germicidal Lamps
The ultraviolet germicidal lamps (UV type ‘C’) can destroy residual bacteria and viruses as they pass by.
2.4. Photocatalytic Oxidation Chamber:
The photocatalytic oxidation chamber decomposes toxic odores, odors and viruses from the air 300 times
more effectively than standard activated carbon filters. The chamber is maintenance free as it has the
ability to self-clean itself and never needs replacing.
2.5. Dust and Odor sensors
These sensors continually sample the ambient air to determine and show graphically the air quality. When
in
Auto mode
, the unit will automatically adjust its fan speed to deal with changes in the concentrations of
dust and/or odors.
3.
Control Panel Buttons
3.1. Power Button
The large circular button on the far right hand side of the control panel is used to turn the unit on and off.
3.2. Fan Speed Button
This button is used to set one of the 4 different fan speeds with each speed being indicated by a different
colored ring of light around the On/Off button.
High
is the highest speed and is indicated by a red ring,
Medium
is indicated by an orange ring,
Low
is indicated by a blue ring and
Quiet
is indicated by a green
ring. Pressing the fan speed button in the Auto Mode or Purify Air mode will switch the unit to Manual
mode.
3.3. Purify Air Button
This button is used to turn the
Purify Air mode
on or off.
