ASEM SR 85, Руководство по обслуживанию

Страница: 47 / 125

3.2.4 Control Command
- continue
ESC !
n - continue
[Description] Select print mode(s) using n as follows:
Bit ON/OFF Hex Decimal Function
Off 00 0
Character font A (12

24)
0
On 01 1
Character font B (9

17)
1-2 - - - Undefined.
Off 00 0 Emphasized mode not selected.
3
On 08 8 Emphasized mode selected.
Off 00 0 Double-height mode not selected.
4
On 10 16 Double-height mode selected.
Off 00 0 Double-width mode not selected.
5
On 20 32 Double-width mode selected.
6 - - - Undefined.
Off 00 0 Underline mode not selected.
7
On 80 128 Underline mode selected.
ESC $
nL nH
[Name] Set absolute print position.
[Format] ASCII ESC $
nL nH
Hex 1B 24
nL nH
Decimal 27 36
nL nH
[Range] 0

nL

255
0

nH

255
[Description] Set the distance from the beginning of the line to the position at which subsequent characters are to be printed.
The distance from the beginning of the line to the print position is [(
nL
+
nH
x 256) x (vertical or horizontal motion unit)]
inches.
SR 85 - Service Manual