ASEM SR 85, Руководство по обслуживанию

Страница: 38 / 125

3.2.3 Hexadecimal dumping
This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems.
When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide section
to help you find specific commands.
To use the hexadecimal dump function, follow these steps;
1. Make sure Hexadecimal dumping mode.
DIP Switch Setting: DIP Switch 2-4 ON.
LCD menu Setting : Generic  SelfTest mode  Hexadump
2. Power the printer off.
3. Turn on the power while pressing the FEED button or executing
GS ( A
command; then the printer prints “HEXADECIMAL DUMP
MODE …” on the paper roll and enter the hexadecimal dump mode.
4. Run any software program that sends data to the printer. The printer will print all the codes it receives in a two-column format. The
first column contains the hexadecimal codes and the second column gives the ASCII characters that correspond to the codes.
HEXADECIMAL DUMP MODE
PRESS PAPER FEED BUTTON THREE
TIMES TO EXIT DUMP MODE
1D 57 00 02 1D 48 02 42 61 72 . W . . . H . B a r
43 6F 64 65 20 50 72 69 6E 74 C o d e P r i n t
69 6E 67 0A 0A 1D 6B 00 31 32 i n g . . . K . 1 2

A period (.) is printed for each code that no ASCII equivalent.

During the hexadecimal dump all commands expect
DLE EOT
and
DLE ENQ
are disabled.(Serial , Parallel Interface)
5. When the printing finishes, turn off the printer or press the FEED button three times, and then change Self-Test mode.
DIP switch Setting : DIP switch Setting 2-4 OFF
LCD menu setting : Generic

SelfTest mode

Self-Test
6. Turn on the printer and then the hexadecimal mode is off.
SR 85 - Service Manual